http://www.pspaudioware.com/
제목 없음
PSP MixTreble
Description: PSP
MixTreble is a plug-in processor which has been designed for processing a range
of treble frequencies. Its universality and great possibilities in creating
sound are ensured by these expanded sections:
- the hiss removing section which allows a decrease in the hiss content or in
the undesired reverberation of a room in the range of treble frequencies;
- the transient section designed for stimulating flattened transients;
- the section of widening the frequency range by enriching the signal in
lacking harmonics;
- the enhancer section which makes it possible to increase the spatiality of
the processed material.
Features:
four algorithms designed to provide processing adequate for
different aspects of sound in the high frequency range, wide range of possible
sounds, switchable soft clipping algorithm which prevents output level from
exceeding 0dBFS, principles of algorithms based on analog devices, mixing of
input signal with processed one in the desired proportions, contains a set of
factory presets.
Applications:
processing single tracks for better presence in the mix,
processing any kind of tracks or groups for removing the noise floor and better
stereo image, processing mixes or archival material for overall treble
improvement - the better S/N ratio, detailed sound, clear articulation and
breath.
back to top
PSP MixPressor
Description:
PSP MixPressor is a compressor which enables the user to obtain a sound quality
typical for classic devices with valve and optoelectronic circuits.
- The compressor works with a 'soft knee' which lessens negative effects
connected with the operation of the system.
- The level detector can operate in two modes: peak mode and RMS mode, which
enables the user to adjust the time characteristics to the material
processed.
The times of the attack and release can be regulated across a wide
range or an automatic setting can be chosen.
- Regulation of the 'hold' makes it possible to regulate the character of the
bass-frequency sound.
- The side chain signal has a smoothly-swept 'bell-type' filter thanks to
which the phenomenon of 'pumping' can be limited, or the compressor can be used
as a 'de-esser'.
The PSP MixPressor plug-in also contains a limiter which can operate as a
warm-sounding peak limiter, useful during mastering, or as a limiter-saturator
with a sharper sound, which is excellent for brightening-up the sound of
percussion loops.
Unique meters simultaneously indicate the peak and VU
levels before or after compression, as well as the mean gain reduction.
Features: compressor with
'soft-knee' characteristics; peak or RMS level detection; automatic and manual
timings for attack and release; filter in the side chain control circuitry;
limiter-saturator; unique peak, VU and gain-reduction meters; a library of 18
presets.
Applications: 'soft'
compression of full mixes during mastering; compression of any tracks or groups
during mixing.
back to top
PSP MixSaturator
Description: PSP MixSaturator is a
specialised plug-in processor whose aim is to produce a saturated sound, typical
for such analog devices as tape recorders and valve circuits. In the interests
of ensuring a wide range of sound possibilities and high sound quality, three
algorithms have been used in this plug-in:
- the analog saturation simulation algorithm, which enables the user to choose
one of the seven non-linearity curves characteristic of valve devices, analog
tape and digital clipping,
- the bass frequencies processing algorithm, whose aim is to add warmth to the
sound within the bass frequencies range, through adding harmonics and increasing
the bass in a recording,
- the treble frequencies processing algorithm, which gives the user the
possibility of simulating tape saturation within the treble frequencies range,
without increasing the level of distortion and aliasing.
Features: the simulation of
saturated sound characteristic of valve devices and tape recorders; special
circuits to shape the sound of bass and treble frequencies; a wide range of
possible sounds; a library of 24 presets.
Applications: the enrichment of sound with
harmonics and increasing the middle level while recording, mixing and mastering;
the processing of mixes and single tracks.
back to top
Description:
PSP MixBass is a specialised low frequency processor plug-in which is designed
to assist in attaining a punchy, analog bass sound. In order to ensure a wide
range of sound capabilities while retaining a high sound quality, a series of
innovative solutions are employed with this plug-in:
- a low-frequency compression algorithm which enables the user to adapt
dynamic bass features to the psycho-acoustic properties of the ear,
- a bottom-end harmonics generator which adds character and definition to the
range of bottom end frequencies, particularly in relation to synthetic bass and
percussion loops,
- a soft (pseudo-analog) clipping algorithm which prevents the occurrence of
digital distortion when exceeding 0dBfs as well as allowing an increase of
volume to around 3dB without a deterioration in the quality of recording.
Features: wide scope
of possible sounds, physiological (adapted to the manner of human hearing)
compression of low frequencies, additional enhancement of the lowest frequencies
by adding harmonic frequencies, a gentle clip algorithm if the 0dBfs level is
surpassed,a library of 21 presets is included.
Applications: enhancing low frequency sounds
during recording, mixing and mastering, treatment of all mixes and individual
soundtracks (percussion loops, synthetic bass, other acoustic instruments both
electric and electronic).
Description:
PSP PseudoStereo plug-in enables the conversion of the mono signal into a stereo
one. Due to processor operation the mono signal gains features resembling a
record performed by the use of a pair of microphones. This appliance proves
particularly valuable when mixing MIDI material, when for instance percussion
tracks need some depth and natural spatial effect. This plug-in enables the user
to create the impression of "vigorous drums" based on mono samples. It can also
be used for the purpose of re-mastering mono tracks.
Applications: pseudo-stereo encoding
while recording, mixing and re-mastering mono tracks.
Features: wide range of effects,
visualization of stereo to mono ratio, emphasis of transients in processor
chain, enclosed programs library.
back to top
PSP StereoEnhancer
Description: PSP StereoEnhancer
plug-in allows for the improvement of the stereo track spatial effect. Due to
three processor operation modes optimal settings can be applied to any audio
material. With the use of PSP StereoEnhancer the stereo sound of acoustic
instruments as well as poor stereo archive tracks can be improved. This plug-in
can also applied for the purpose of new music material mastering.
Applications: enhancing stereophonic
space while recording, mixing, mastering and re-mastering single or multiple
stereo tracks and mixes.
Features:
wide range of effects from subtle to extreme, visualization of
mono compatibility, enclosed programs library.
back to top
PSP StereoController
Description:
PSP StereoController is used for correcting stereophonic errors.
This plug-in allows for removing basic errors such as: reverse signal phase or
change of channels. It can also be used for effecting subtle changes into the
stereo image. PSP StereoController is particularly helpful whilst mastering
tracks performed in poor monitoring conditions.
Applications: eliminating stereo
errors during mastering and re-mastering stereo tracks.
Features: independent control of differential
signal level, traditional channel balance, changing stability of left and right
without moving center channel position, adjusting center position without
changing entire stereo image, swapping and changing phase of channels.
Visualizing of left / right balance and stereo / mono balance. This processor
does not break tonal balance and mono compability.
back to top
PSP StereoAnalyser
Description: PSP StereoAnalyser
is used for measuring and estimating the correctness of the stereo signal. Apart
from mean and peak measurement of L R or M S signal levels it allows for
oscilloscope observation of stereo sound which reveals phase errors and lack of
channel balance.
Applications: analyzing of stereo
image properties while recording, mixing, mastering and re-mastering of stereo
tracks.
Features: stereo
oscilloscope with hold option and manually or automatically adjusted operating
level, L R or S M level meters with mean/peak/peak hold features and held peak
level text output.